User Manual

23
Status information
ì
Click Refresh to refresh this screen and update the displayed data.
Device
You will find the most important device data on the Device screen in the Status menu.
ì
In the Status menu, select Device:
ì
Click Refresh to refresh this screen and update the displayed data.
SSID Wireless network ID (see page 29).
Allowed Channels Channels which are allowed for wireless communication
Current Channel Radio channel that is currently being used for data transfer in
the wireless network.
Transmit Rate Transmission rate currently set.
Max Frame Burst Maximum time, in microseconds, that the device transmits
IEEE 802.11g wireless traffic only.
RTS Threshold RTS (Ready to send) Threshold defines the latency between
the message "Ready to send" and the sending of the next data
packet.
Firmware Version Firmware version currently installed on your device.
System Time System time for your device.
System Uptime Your device's operating time since the last time the system
was started in the format HH:MM:SS.