User Manual

22
Status information
Local Network
The Local Network page shows information about the local network settings.
ì
In the Status menu, select Local Network.
The ARP Table shows the clients which are currently connected to the router via the
LAN interface.
The following information is displayed:
– IP Address
–MAC Address
– Interface (name of the LAN interface)
– Static (indicates whether the IP address of the client is static or dynamic)
The DHCP Server Active IP/MAC Table shows the clients in the network that currently
have been assigned an IP address by the Gigaset SE587 WLAN dsl DHCP server. The fol-
lowing information is displayed for each client:
– IP Address
–MAC Address
– Lease Time(Sec) (remainig time before the DHCP server will assign a new IP
address)
– Host Name
ì
Click Refresh to refresh this screen and update the displayed data.
Wireless Network
The Wireless page shows information about the wireless network settings.
ì
In the Status menu, select Wireless.
MAC Address Local MAC address of the device’s LAN interface.
IP Address Local IP address of the device.
LAN Subnet Mask Subnet mask used in the local network.
DHCP Server Shows if the DHCP server of the device is enabled or disabled.
Start IP Address First IP address in the IP range which can be assigned to a
client by the DHCP server.
End IP Range Last IP address in the IP range which can be assigned to a client
by the DHCP server.
Status Show the status of the wireless network (ON/OFF).
Authentication Security mode used for encryption (see page 31).
Encryption Encryption method used.
MAC Address MAC address of the device’s wireless interface.
Mode Wireless network mode set for data transmission
(see page 29)