User's Manual

System Management
Restoring Factory Default Settings
Cisco RV315W Broadband Wireless VPN Router Administration Guide 88
9
STEP 4 Click OK to save your settings.
Deleting a Local User
The system administrator can remove a new added local user from the local user
database.
To delete a local user:
STEP 1 Click System Management > User Management. The User Management page
opens.
STEP 2 In the Local User List area, check the corresponding user and click Delete.
STEP 3 Click OK to delete it from the local user database.
Restoring Factory Default Settings
To restore the RV315W to the factory default settings, you can press and hold the
RESET button on the back panel for more than 5 seconds, or perform the Reset to
Factory Defaults operation from web-based Configuration Utility.
!
CAUTION During restoring to factory defaults, do NOT turn off the device, shut down the PC,
remove the cable, or interrupt the process in any way until the operation is
complete. This process should take several minutes including the reboot process.
!
CAUTION The Reset To Factory Defaults operation will wipe out the current settings used on
the RV315W. We recommend that you back up your current settings before
restoring the RV315W to the factory default settings.