User's Manual
Table Of Contents
- Federal Communication Commission Interference Statement
- Getting Started
- Using the Setup Wizard
- Viewing System Status
- Port Management
- Networking
- VPN
- Quality of Service (QoS)
- Security
- System Management
- Where to Go From Here
Security
Preventing ARP Attacks
Cisco RV315W Broadband Wireless VPN Router Administration Guide 84
8
IP&MAC Binding allows you to bind an IP address to a MAC address and vice
versa. It only allows traffic when the host IP address matches a specified MAC
address. By requiring the gateway to validate the source traffic's IP address with
the unique MAC address of device, this ensures that traffic from the specified IP
address is not spoofed.
STEP 5 Enter the following information:
• IP Address: Enter the IP address that you want to bind with a MAC address.
• MAC Address: Enter the MAC address.
STEP 6 Click OK to save your settings and return to the ARP Attack Protection page.
STEP 7 To edit the settings of an IP&MAC binding rule, select the corresponding rule and
click the Edit icon. To delete an IP&MAC binding rule, select the corresponding rule
and click the Delete icon.