User's Manual
Table Of Contents
- Federal Communication Commission Interference Statement
- Getting Started
- Using the Setup Wizard
- Viewing System Status
- Port Management
- Networking
- VPN
- Quality of Service (QoS)
- Security
- System Management
- Where to Go From Here
Port Management
Configuring Wireless Settings
Cisco RV315W Broadband Wireless VPN Router Administration Guide 49
4
WPA-
Enterprise
WPA-Enterprise uses WPA with RADIUS authentication. This
mode supports TKIP and AES encryption mechanisms
(default is TKIP) and requires the use of a RADIUS server to
authenticate users.
If you choose this option, enter the following information:
• Key Renewal Timeout: Enter a value to set the interval
at which the key is refreshed for clients associated to
this SSID. A value of zero (0) indicates that the key is not
refreshed. The default value is 3600 seconds.
• Encryption: Choose TKIP, AES, or TKIP+AES as the
encryption algorithm for data encryption. The default is
TKIP+AES.
• RADIUS Server IP Address: Enter the IP address of
the RADIUS server.
• RADIUS Server Port: Enter the port number of the
primary RADIUS server. The default value is 1812.
• RADIUS Server Key: Enter the key for authentication
used by the RADIUS server and the RV315W.
Security
Mode
Configuration