User's Manual
Table Of Contents
- Federal Communication Commission Interference Statement
- Getting Started
- Using the Setup Wizard
- Viewing System Status
- Port Management
- Networking
- VPN
- Quality of Service (QoS)
- Security
- System Management
- Where to Go From Here
4
Cisco RV315W Broadband Wireless VPN Router Administration Guide 32
Port Management
This chapter describes how to configure your Internet connection, LAN, wireless
network, and 3G wireless network. It includes the following sections:
• Configuring WAN Connections
• Configuring LAN
• Configuring Wireless Settings
• Configuring 3G Wireless Connection
Configuring WAN Connections
By default, the RV315W is configured to receive a public IP address from your ISP
automatically through DHCP. Depending on the requirements of your ISP, you may
need to modify the WAN settings to ensure the Internet connectivity.
Viewing WAN Connection Information
Click Port Settings > WAN > WAN Interface Settings. The WAN Interface
Settings page opens.
This page displays the following information:
Parameter Description
Port Number of the physical WAN interface, such as WAN0
or WAN1.
Connection Name WAN connection name through the physical WAN
interface or its subinterface.