User's Manual

Using the Setup Wizard
Configuring WAN Connection
Cisco RV315W Broadband Wireless VPN Router Administration Guide 20
2
STEP 5 In the Enable VLAN area, click Enable when the ISP uses the VLAN ID to add the
tag to the users, and then enter the following information:
• VLAN ID: Enter the tag of the VLAN ID.
• 802.1p Priority: Enter the value of the 802.1p priority.
L2TP Choose this option if you want to use Layer 2 Tunneling
Protocol (L2TP) to connect to the Internet.
Use the necessary information from your ISP to complete the
L2TP configuration:
• Auto Get IP: Enable or disable to automatically obtain
an IP address.
• L2TP Server IP Address: Enter the IP address of the
L2TP server.
• User Name: Enter the username that is required to log
into the L2TP server.
• Password: Enter the password that is required to log
into the L2TP server.
• Keep Alive: Choose one of the following options:
- Connect Idle Time: Let the RV315W disconnect
from the Internet after a specified period of
inactivity (Idle Time). This option is recommended if
your ISP fees are based on the time that you spend
online. If you choose this option, enter the idle time
in the field. The default value is 300 seconds.
- Keep Alive: Keep the connection always on,
regardless of the level of activity. This option is
recommended if you pay a flat fee for your Internet
service. If you choose this option, enter the interval
to automatically reestablish the WAN connection
after the connection is down. The default value is 30
seconds.
Internet
Connection
Type
Configuration