User's Manual

Using the Setup Wizard
Configuring WAN Connection
Cisco RV315W Broadband Wireless VPN Router Administration Guide 19
2
PPPoE PPPoE uses Point-to-Point Protocol over Ethernet (PPPoE) to
connect to the Internet.
Choose this option if your ISP provides you with client
software, username, and password.
• User Name: Enter the username that is required to log
into the ISP.
• Password: Enter the password that is required to log
into the ISP.
• Service Name: Enter the name for the PPPoE service.
• Keep Alive: Choose one of the following options:
- Connect Idle Time: Let the RV315W disconnect
from the Internet after a specified period of
inactivity (Idle Time). This option is recommended if
your ISP fees are based on the time that you spend
online. If you choose this option, enter the idle time
in the field. The default value is 300 seconds.
- Keep Alive: Keep the connection always on,
regardless of the level of activity. This option is
recommended if you pay a flat fee for your Internet
service. If you choose this option, enter the interval
to automatically reestablish the WAN connection
after the connection is down. The default value is 30
seconds.
Internet
Connection
Type
Configuration