User's Manual
Table Of Contents
- Federal Communication Commission Interference Statement
- Getting Started
- Using the Setup Wizard
- Viewing System Status
- Port Management
- Networking
- VPN
- Quality of Service (QoS)
- Security
- System Management
- Where to Go From Here
Getting Started
Product Overview
Cisco RV315W Broadband Wireless VPN Router Administration Guide 9
1
Default Settings
These are the default settings used when configuring your RV315W for the first
time.
NOTE Press and hold the RESET button for more than 5 seconds with a paper clip or a
pencil tip to reboot the unit and restore the factory defaults. Changes that you have
previously made to the RV315W settings are lost.
LAN1-8 Ports These ports provide a LAN connection to network devices,
such as PCs, print servers, or switches.
RESET The RESET button has two functions:
• Reboot: Press the RESET button for at least 1, but no
more than 5 seconds with a paper clip or a pencil tip
to reboot the unit.
• Restore to Factory Defaults: Press and hold the
RESET button for more than 5 seconds to reboot the
unit and restore to factory defaults. Changes that you
have previously made to the RV315W settings are
lost.
POWER (12VDC) The POWER port is where you connect the supplied power
adapter (12 V/3 A).
Power Switch Powers the unit on or off.
Parameter Default Value
Username cisco
Password cisco
LAN IP 192.168.1.1
DHCP Range 192.168.1.100 to 192.168.1.200