User's Manual

Configuring the Firewall
Configuring Port Forwarding
Cisco RV 120W Administration Guide 96
4
• STRMWORKS
• Terminal Access Controller Access-Control System (TACACS)
• Telnet (command)
• Trivial File Transfer Protocol (TFTP)
• Routing Information Protocol (RIP)
• IKE
• Simple HTTPD web server
• UDP Encapsulation of IPsec packets (IPSEC-UDP-ENCAP)
• IDENT protocol
• VDOLive (web video delivery)
• SSH
• SIP-TCP
• SIP-UDP
STEP 4 Choose the action:
•
Always Block
—Always block the selected type of traffic.
•
Always Allow
—Never block the selected type of traffic.
•
Block by schedule, otherwise allow
—Blocks the selected type of traffic
according to a schedule. See Creating Firewall Schedules, page 85.
•
Allow by schedule, otherwise block
—Allows the selected type of traffic
according to a schedule. See Creating Firewall Schedules, page 85.
STEP 5 If you selected b
block or allow by schedule
, choose the schedule.
STEP 6 Select the S
Source Users
:
•
Any
—Specifies that the rule being created is for traffic from the given
endpoint.
•
Single Address
—Limit to one host. Requires the IP address of the host to
which this rule would be applied.
•
Address Range
—This is used to apply this rule to a group of computers/
devices within an IP address range. Requires a f
from IP address
and t
to IP
address
.