User's Manual

1216264_002
Exede Residential Satellite Modem – RM5110 Series Page 3
Open Source Software Information
 This product incorporates various open source software packages that are distributed under license
terms as described at http://www.viasat.com/FOSS-Usage.
Important Safety Instructions
 Grounding Statement - The cable distribution system should be grounded (earthed) in accordance
with ANSI/NFPA 70,the National Electrical Code (NEC), in particular Section 820.93, Grounding of
Outer Conductive Shield of a Coaxial Cable.
 BEFORE INSTALLING THE SATELLITE MODEM, MAKE SURE YOUR ELECTRICAL OUTLET IS PROPERLY
WIRED AND YOUR COMPUTER EQUIPMENT IS PROPERLY GROUNDED. CONSULT WITH A LICENSED
ELECTRICIAN IF YOU ARE NOT SURE.
 READ AND UNDERSTAND ALL OPERATING INSTRUCTIONS IN THIS USER’S GUIDE.
 READ AND UNDERSTAND ALL SAFETY PRECAUTIONS PRIOR TO CONNECTING CABLES TO THE
SATELLITE MODEM.
Warnings - A WARNING is defined as a procedure or practice that, if not correctly followed, could result
in injury, death, or long term health hazard. Always observe the following WARNINGS:
 There are no user-serviceable parts inside any of the equipment in your system. There are
potentially lethal voltages inside the equipment. It should only be opened by a technician trained
and certified to service the product.
 RF Radiation Hazard. The transmitting equipment is capable of generating RF levels above the
maximum permissible uncontrolled exposure level. Do not enter the radiation beam pattern of
the transmitter feed horn and / or antenna when the transmitter is on.
 When the Satellite Modem is powered on, DC voltage is present on the rear panel IFL connector.
 To prevent fire or shock hazard, do not expose this Satellite Modem to rain or moisture. The
Satellite Modem must not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, should be placed on or around the Satellite Modem.
 Postpone Satellite Modem installation until there is no risk of thunderstorm or lightning activity in
the area.
 To prevent electrical shock, if the unit is provided with a polarized plug, do not connect the plug
into an extension cord, receptacle or other outlet unless the plug can be fully inserted with no
part of the blades exposed.
 The In-Line Power Supply input power cord must be connected to a properly grounded three-
prong AC outlet. Do not use adapter plugs, or remove the grounding prong from the plug.
 Maintain the Satellite Modem in a climate-controlled location with adequate air circulation at
temperature that is always greater than 40 degrees Fahrenheit and less than 90 degrees
Fahrenheit.
 The Satellite Modem, including the coaxial cable connector, may become hot. Avoid touching the
coaxial cable connector unless its power adapter has been unplugged from the power outlet for at
least one minute.
 To prevent overheating, do not block the ventilation holes on the sides, top, or bottom of the
Satellite Modem.