User's Manual

MW600-B-LO Wireless 802. 11b/g wireless PCI-E Adapter Card
6
Before Using the WM600-B-LO, check to be sure your system meets the following minimum
requirements:
z Available PCI-Express card slot
z 64 MB of System Memory
z 150 MHz or faster processor
z The most recent BIOS version for your system
Hardware Driver Compatability
To ensure optimal performance, it is recommended that you download the latest hardware
drivers for all your particular adapters from the manufacturer's web site.
It is recommended that you install the latest Service Packs and/or Hot Fixes from Microsoft
prior to installing WM600-B-LO PCI-Express Card Software. Refer to the Release Notes for
the latest list of Service Packs and/or Hot Fixes that are required.
LED Indicators
The WM600-B-LO features two LED indicators:
2 LED (One is orange, another is green)
z Orange: still orange after power on.
z Green: blinking slowly when link with AP and blinking quickly when have data
transfers
Introduction
Overview of the Product
The adapter gives you the flexibility to install your PC in the most convenient location available,
without the cost of running network cables.
The adapter's auto-sensing capability allows high packet transfer rate of up to 54Mbps for
maximum throughput, or dynamic range shifting to lower speeds due to distance or
operating limitations in an environment with a lot of electromagnetic interference. It can
also interoperate with all 11Mbps wireless products. Your wireless communications are
protected by up to 152-bit WEP and WPA encryption for high security.
Features