User Manual

WLAN PCI Adapter User’s Manual
Appendix A – FAQ
1. What is IEEE 802.11 standard?
 The IEEE 802.11 is a wireless LAN industry standard, and the objective
of IEEE 802.11 is to make sure that different manufactures’ wireless
LAN devices can communicate to each other.
2. What is WEP?
 As described in the IEEE 802.11 standard, WEP (Wired Equivalent
Privacy) is a data privacy mechanism based on a 40 bit shared key
algorithm.
3. My desktop PC cannot recognize the Wireless Network PCI Adapter.
 Please make sure that the Card is inserted into the PCI slot of your
desktop PC properly (check this when the PC is powered off).
 And also make sure that the PCI controller is enabled in the BIOS of
your desktop PC.
 Try installing the card in a different PCI slot.
4. In Infrastructure mode, my desktop PC cannot communicate with the
others PCs on the network.
 First, make sure that the SSID is same as the others PC.
 Check if the WEP is enabled on the Access Point, if it is, set your
Adapter’s WEP the same as the Access Point.
 Also check the Access Point’s Authentication Type and Preamble Type
and match those settings.
5. In ad-hoc mode, my desktop PC cannot communicate with the others
PCs on the network.
 Make sure the SSID and the Channel number are the same as other
wireless stations.
 Check if WEP settings are the same in all wireless stations.
 Check the Network Properties, make sure proper protocol is installed
and File and Printer Sharing is enabled.
38