User's Manual

12
Connecting the Wireless Access Point to the Wireless
Gateway
1.Connect the 12 VDC Power Supply plug
on the access point to the wall power
outlet. Use only the power adapter
provided with the product.
2. Connect the power plug to the power
receptacle on the wireless access point.
3. Connect one end of the RJ-45 Ethernet
cable to the Ethernet port on the
wireless access point.
4. Connect the other end of the RJ-45
Ethernet cable to an available Ethernet port
on your wireless gateway.
1 Wireless LED
2
Wireless Link LED
3
Wi-Fi Protected Setup™ (WPS) button
4
Wi-Fi Protected Setup (WPS) LED
5
Ethernet LED
6
Power LED
Note: This illustration may vary from the actual product.
1 Reset Restores factory default settings when
held for more than 5 seconds
2 Mode Switch Converts the wireless access point to
a wireless client
3 Ethernet Port Connects the wireless access point to
a receiver or wireless gateway
4 Power Connects device to the external
12 VDC power supply
Note: This illustration may vary from the actual product.
Pairing the Wireless Access Point and Receiver
1. Press the OK button on the receiver.
2. Press the WPS button on the wireless access point.
T15773
Power
Receptacle
RJ-45
Cable
Reset
Ethernet
12VDC
CL
AP
12VDC
To Wall
Power Outlet
Wireless
Gateway
Ethernet Port
T15771
1
2
3
4
5
6
Reset
Ethernet
12VDC
CL
AP
T15772
1
2
3
4