User`s manual

MXGG Series CyberResearch

Motherboards

5.1 Introduction

The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to

certain system settings. This chapter outlines the options that can be changed.

5.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

1. Press the F2 key as soon as the system is turned on or

2. Press the F2 key when the “Press F2 to enter SETUP” message appears on

the screen. 0.

If the message disappears before the D

ELETE key is pressed, restart the computer and try

again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press ENTER to select, press F1 for help and press

SC to quit. Navigation keys are shown below.

Key Function

Up arrow Move to the item above

Down arrow Move to the item below

Left arrow Move to the item on the left hand side

Right arrow Move to the item on the right hand side

+ Increase the numeric value or make changes

- Decrease the numeric value or make changes

Page up Move to the next page

Page down Move to the previous page

Esc Main Menu – Quit and do not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu --

Exit current page and return to Main Menu