User`s manual

MXGG Series CyberResearch

Motherboards

Figure 4-23: VGA Connector

Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector. Step 0:

4.7 Software Installation

All the drivers for the MXGG are on the DVD that came with the system. To install the

drivers, please follow the steps below.

Step 1: Insert the DVD into a DVD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->DVD Drive->autorun.exe"

Step 2: The driver main menu appears.

Step 3: Navigate to the MXGG Series board.

Step 4: A new screen with a list of available drivers appears.

Step 5: Follow the prompts to install all of the necessary drivers. Step 0: