User`s manual

CyberResearch
®
Motherboards MXGG Series
Figure 4-22: USB Connector
4.6.7 VGA Monitor Connection
The MXGG has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the MXGG, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
MXGG. See
Figure 4-23.
CyberResearch, Inc. 77
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com