User`s manual

CyberResearch
®
Motherboards MXGG Series
Figure 4-20: Parallel Device Connector
Step 3: Secure the connector. Secure the DB-25 connector to the external interface by
tightening the two retention screws on either side of the connector.
4.6.5 Serial Device Connection
The MXGG has one male DB-9 connectors on the external peripheral interface panel for a
serial device. Follow the steps below to connect a serial device to the MXGG.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See
Figure 4-21.
CyberResearch, Inc. 75
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com