User`s manual

MXGG Series CyberResearch

Motherboards

Figure 4-17: Audio Connector

Step 3: Check audio clarity. Check that the sound is coming through the right speakers

by adjusting the balance front to rear and left to right. Step 0:

4.6.2 PS/2 Keyboard and Mouse Connection

The MXGG has a dual PS/2 connector on the external peripheral interface panel. The dual

PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the

steps below to connect a keyboard and mouse to the MXGG.

Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is

shown in Chapter 3.

Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse

connector into the appropriate PS/2 connector on the external peripheral

interface connector. See

Figure 4-18.