User`s manual

MXGG Series CyberResearch

Motherboards

Figure 4-13: USB Power Select Jumper Location

4.5 Internal Peripheral Device Connections

This section outlines the installation of peripheral devices to the onboard connectors.

4.5.1 SATA Drive Connection

The MXGG is shipped with two SATA drive cables and one SATA drive power cable. To

connect the SATA drives to the connectors, please follow the steps below.

Step 1: Locate the connectors.

Step 2: Insert the cable connector. Press the clip on the connector at the end of the

SATA cable and insert the cable connector into the on-board SATA drive

connector. See

Figure 4-14.