User`s manual

MXGG Series CyberResearch

Motherboards

4.4.4 CompactFlash® Setup

Jumper Label: JP2

Jumper Type:

2-pin header

Jumper Settings:

See

Table 4-5

Jumper Location:

See

Figure 4-11

The CompactFlash® slot is connected through an IDE connection. This jumper sets the

CompactFlash® card as the master or slave IDE device.

Setting Description

Short Master (Default)

Open Slave

Table 4-5: CompactFlash® Setup Jumper Settings

Figure 4-11: CompactFlash® Setup Jumper Location

4.4.5 CF Voltage Select Jumper

Jumper Label: J_CF1

Jumper Type:

3-pin header

Jumper Settings:

See

Table 4-6

Jumper Location:

See

Figure 4-12

The CF voltage select jumper sets the voltage of the CompactFlash® slot.