User`s manual

MXGG Series CyberResearch

Motherboards

Jumper Location:

See

Figure 4-8

The AT Power Select jumper specifies the systems power mode as AT or ATX.

Setting Description

Open Use ATX power (Default)

Short Use AT power

Table 4-2: AT/ATX Power Select Jumper Settings

Figure 4-8: AT/ATX Power Select Jumper Location

4.4.2 Clear CMOS Jumper

Jumper Label: JP1

Jumper Type:

3-pin header

Jumper Settings:

See

Table 4-3

Jumper Location:

See

Figure 4-9

To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,

and then move back to the default position.

Pin Description

Short 1-2 Normal (Default)

Short 2-3 Clear BIOS

Table 4-3: Clear BIOS Jumper Settings