User`s manual

MXGG Series CyberResearch

Motherboards

4.3.3 DIMM Installation

To install a DIMM, please follow the steps below and refer to Figure 4-7.

Figure 4-7: DIMM Installation

Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they

possible. See

Figure 4-7.

Step 2: Align the DIMM with the socket. Align the DIMM so the notch lines up with the

notch on the memory socket. See

Figure 4-7.

Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.

Clip the two handles into place. See

Figure 4-7.

Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The

memory module is ejected.Step 0:

4.3.4 Motherboard Installation

To install the MXGG motherboard into the chassis please refer to the reference material

that came with the chassis.