User`s manual

MXGG Series CyberResearch

Motherboards

4.3.2 Cooling Kit Installation

WARNING:

DO NOT use the original Intel® heat sink and fan. A proprietary one is

recommended.

Figure 4-5: Cooling Kits

The cooling kit can be purchased from CyberResearch, Inc.; cooling kits include a

heatsink and fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, follow the instructions below.

Step 1: Place the cooling kit onto the socket LGA775 CPU. Make sure the CPU

cable can be properly routed when the cooling kit is installed.

Step 2: Properly align the cooling kit. Make sure the four spring screw fasteners can

pass through the pre-drilled holes on the PCB.