User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 141
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com

COM5
System is remotely accessed through COM5

COM6
System is remotely accessed through COM6
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
 Base Address, IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
 Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
 115200 8,n,1 DEFAULT
 57600 8,n,1
 38400 8,n,1
 19200 8,n,1
 09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
 Flow Control [None]
Use the Flow Control option to report the flow control method for the console redirection
application.

None DEFAULT
No control flow,