User`s manual

MXGD Series CyberResearch
®
Motherboards
140 ©Copyright 2009 CyberResearch, Inc.
BIOS Menu 11: Remote Access Configuration [Advanced]
 Remote Access [Disabled]
Use the Remote Access option to enable or disable access to the remote functionalities
of the system.

Disabled DEFAULT
Remote access is disabled.

Enabled
Remote access configuration options shown below
appear:
 Serial Port Number
 Serial Port Mode
 Flow Control
 Redirection after BIOS POST
 Terminal Type
 VT-UTF8 Combo Key Support
 Sredir Memory Display Delay
These configuration options are discussed below.
 Serial Port Number [COM1]
Use the Serial Port Number option to select the serial port used for remote access.

COM1 DEFAULT
System is remotely accessed through COM1

COM2
System is remotely accessed through COM2

COM3
System is remotely accessed through COM3

COM4
System is remotely accessed through COM4