User`s manual

MXGD Series CyberResearch
®
Motherboards
134 ©Copyright 2009 CyberResearch, Inc.
The Slope PWM n option can only be set if the FAN Mode n Setting option is set to
Automatic Mode. Use the Slope PWM n option to select the linear rate at which the
PWM mode increases with respect to an increase in temperature. A list of available
options is shown below:
 0.125 PWM
 0.25 PWM
 0.5 PWM
 1 PWM
 2 PWM
 4 PWM
 8 PWM
 15 PWM
The following system parameters and values are shown. The system parameters that are
monitored are:
 System Temperatures: The following system temperatures are monitored
o Temperature Sensor #1
o Temperature Sensor #2
o Temperature Sensor #3
 Fan Speeds: The CPU cooling fan speed is monitored.
o Fan1 Speed
o Fan2 Speed
o Fan3 Speed
 Voltages: The following system voltages are monitored
o CPU Core
o Vcc
o +3.30V
o +5.00V
o +12.0V
o +1.2V
o +1.5V
o +1.25V
o VBAT