User`s manual
CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 133
25 Business Park Drive P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA www.cyberresearch.com
Temperature n Limit of Start [020]
WARNING:
Setting this value too high may cause the fan to start only when the
CPU is at a high temperature and therefore cause the system to be
damaged.
The Temperature n Limit of Start option can only be set if the FAN Mode n Setting
option is set to Automatic Mode. Use the Temperature n Limit of Start option to select
the CPU temperature at which the cooling fan should automatically turn on. When the fan
starts, it rotates using the starting pulse width modulation (PWM) specified in the Fan n
Start PWM option below. To select a value, select the Temperature n Limit of Start
option and enter a decimal number between 000 and 127. The temperature range is
specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Fan n Start PWM [070]
The Fan n Start PWM option can only be set if the FAN Mode n Setting option is set to
Automatic Mode. Use the Fan n Start PWM option to select the PWM mode the fan
starts to rotate with after the temperature specified in the Temperature n Limit of Start is
exceeded. The Super I/O chipset supports 128 PWM modes. To select a value, select the
Fan n Start PWM option and enter a decimal number between 000 and 127. The
temperature range is specified below.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Slope PWM n [0.5 PWM]