User`s manual

MXGD Series CyberResearch
®
Motherboards
132 ©Copyright 2009 CyberResearch, Inc.
enough. Parameters must be set by the
user.

PWM Manual mode
Pulse width modulation set manually
When the FAN Mode n Setting option is in the Automatic Mode, the following
parameters can be set.
 Temperature n Limit of OFF
 Temperature n Limit of Start
 Fan n Start PWM
 Slope PWM n
When the FAN Mode n Setting option is in the PWM Manual Mode, the following
parameters can be set.
 Fan n PWM control
 Temperature n Limit of OFF [000]
WARNING:
Setting this value too high may cause the fan to stop when the CPU is
at a high temperature and therefore cause the system to be damaged.
The Temperature n Limit of OFF option can only be set if the FAN Mode n Setting
option is set to Automatic Mode. Use the Temperature n Limit of OFF option to select
the CPU temperature at which the cooling fan should automatically turn off. To select a
value, select the Temperature n Limit of OFF option and enter a decimal number
between 000 and 127. The temperature range is specified below.
 Minimum Value: 0°C
 Maximum Value: 127°C
