User`s manual

MXGD Series CyberResearch

Motherboards

5.8.4 PS/2 Keyboard and Mouse Connection

The MXGD has a dual PS/2 connector on the external peripheral interface panel. The dual

PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the

steps below to connect a keyboard and mouse to the MXGD.

Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is

shown in Chapter 3.

Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse

connector into the appropriate PS/2 connector on the external peripheral

interface connector. See Figure 5-22. Step 0:

Figure 5-22: PS/2 Keyboard/Mouse Connector

5.8.5 Serial Device Connection

The MXGD has a single female DB-9 connector on the external peripheral interface panel

for a serial device. Follow the steps below to connect a serial device to the MXGD.