User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 105
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
5.8.3 Parallel Device Connection
A single female DB-25 connector on the external peripheral interface panel connects to
parallel communications devices. Follow the steps below to connect a parallel device.
Step 1: Locate the DB-25 connector. The location of the DB-25 connector is shown in
Chapter 3.
Step 2: Insert the DB-25 connector. Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See Figure 5-21.
Figure 5-21: Parallel Device Connector
Step 3: Secure the connector. Secure the DB-25 connector to the external interface by
tightening the two retention screws on either side of the connector. Step 0: