User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 101
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
with the USB connectors on the MXGD, connect the cable connectors to the
onboard connectors. See Figure 5-17.
Figure 5-17: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis.Step 0:
5.7.7 USB Cable (Four Port) (Optional)
Four port USB 2.0 cables can be separately purchased from CyberResearch. To install a
four port USB cable onto the MXGD, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 4.