User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 99
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
screws. Step 0:
5.7.5 SATA Drive Connection
The MXGD is shipped with six SATA drive cables and three SATA drive power cables. To
connect the SATA drives to the connectors, please follow the steps below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2: Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the onboard SATA drive
connector. See Figure 5-15.
Figure 5-15: SATA Drive Cable Connection
Step 3: Connect the cable to the SATA disk. Connect the connector on the other end