User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 87
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the [Fan model#] heat sink. The thermal
paste between the CPU and the heat sink is important for optimum
heat dissipation.
To install the cooling kit follow the instructions below.
Step 1: Place the cooling kit onto the socket LGA775 CPU. Make sure the CPU
cabl
e can be properly routed when the cooling kit is installed.
Step 2: Properly align the cooling kit. Make sure the four spring screw fasteners can
p
ass through the pre-drilled holes on the PCB.
Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make
sure the four
threaded screws on the corners of the cooling kit properly pass
through the predrilled holes on the bottom of the PCB.
Step
4: Secure the cooling kit. From the solder side of the PCB, align the support
bra
cket to the screw threads on heat sink that were inserted through the PCB
holes. (See Figure 5-7)