User`s manual

CyberResearch
®
Motherboards MXGD Series
CyberResearch, Inc. 85
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
CPU socket.
Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
Carefully match the two orientation notches on the CPU with the socket
alignment keys.
Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly. See
Figure 5-4.
Figure 5-4: Insert the Socket LGA775 CPU
Step 8: Close the CPU socket. Close the load plate and engage the load lever by
pushing it back to its original position. Secure the load lever under the retention
tab on the side of CPU socket.
Step 9: Connect the CPU 12V cable. After the cooling kit is installed connect the CPU
cable to the CPU 12V power connectorStep 0: