User`s manual

MXGD Series CyberResearch
®
Motherboards
80 ©Copyright 2009 CyberResearch, Inc.
o When working with the MXGD, make sure that it is disconnected from all
power supplies and that no electricity is being fed into the system.
Before and during the installation of the MXGD DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the MXGD is properly installed.
 All the items in the packing list are present
 The CPU is installed
 The CPU cooling kit is properly installed
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The MXGD is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o Primary and secondary IDE device
o SATA drives
o Power supply
o USB cables
o Serial port cables
o I/O Shielding
 The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o Keyboard
o Mouse