User`s manual

2.2 LCD Installation

The Touch Panel functionality comes as an optional implementation to the MPD 1xAG LCD. The

LCD panel connects to the host system’s VGA interface via the included VGA cable or a

separately purchased DVI cable to a VTA card that features DVI connectivity.

2.2.1 LCD without a Touch Screen

Connection

Step 1. Connect the graphics card to the VGA or DVI-D signal input port on the rear panel.

Step 2. Connect the +12V DC jack or the DC power source to the terminal block.

Figure 222-1: Connection w/o Touch Screen

MPD 1xAG Series CyberResearch

Displays