User`s manual

WARNING!
 The MPD 1xAG series LCD must be installed and operated only by trained
and qualified personal. Maintenance, upgrade, or repair on the open
device may only be RMA’ed or carried out by qualified personnel who are
familiar with the associated dangers.
 Since the device may weigh up to 10 kg (not including a swing arm or
accessories of the like), it is advisable to have another person assist in the
installation.
 Make sure there is sufficient air circulation around the device when
installing the LCD.
 The openings for cooling on the device (on upper and back-end side)
must not be obstructed by objects or the like. If the ventilation holes are
blocked, this can cause an overheating of the PC. At least 5 cm of space
free around the unit should be available to prevent the device from
possibly overheating!
 The LCD should be properly grounded. The voltage feeds must not be
overloaded. Adjust the cabling and provide external overcharge protection
as noted by the electrical values indicated on the short description label
attached to the back of the LCD.
 Before the LCD is disassembled we strongly recommended that you
should shut down the system and unplug the power cord. Electric shock
and personal injury might occur if you access the main board inside the
LCD while the power cord is still attached.
CyberResearch
®
Displays MPD 1xAG Series
CyberResearch, Inc. 27
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com