User`s manual
9. Special applications such as aviation/aerospace control, critical
10. Fault-tolerant and failsafe designs should be implemented with the use of the series models
on transportation vehicles, ships, safety/security devices, or medical devices not related to
life-support functionalities. Users/integrators should take the responsibility for
implementations with adequate levels of reliability and safety.
11. Preventive designs should be implemented so as to avoid the communications faults
between the LCD and the PC/workstation/terminals that controls it.
Precautions about Damages to the LCD
1. Do not drop the LCD against a hard surface. Doing so will damage the display.
2. Do not strike or exert excessive force onto the touch panel.
3. Touching the touch panel using a sharp object will damage the LCD panel.
4. Avoid environments exposed to direct sunlight, dust, or chemical vapors.
5. The LCD is passively cooled. In no circumstances should the LCD operate with the
openings obstructed by foreign
objects. The ambient temperature of the installation site
should be observed and controlled to avoid overheating the LCD.
6. Condensation might form inside the LCD chassis if exposed to sudden changes in
temperature.
7. Carefully route the power cord so that people cannot step on it. Do not place anything over
the power cord.
8. If the equipment should be left unused for an extended period of time, disconnect it from the
power source to avoid damage by transient over-voltage.
9. If any of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work properly, or you cannot get it to work according to the
user manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
WARNING!
Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards authority could void your
authority to operate the equipment.
CyberResearch
®
Displays MPD 1xAG Series
CyberResearch, Inc. 5
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com