User`s manual

Power Cable for Terminal

Block

1 Optional

Touch Screen RS-232 Cable /

Touch Pen / Driver CDROM

1 Optional

If any of these items are missing or damaged, contact CyberResearch, Inc.

Configuration Options

 Chassis coating/paint/color options

 Touch screen options

 RS-232 extension cable

 OSD extension wire cable

 Wall-mount bracket

 Replacement rubber gasket

Safety Precautions

1. Prior to installing, moving, and modifying the LCD panel, be sure that the unit’s power is

turned off and the power cord is disconnected.

2. Do not apply voltage levels that exceed the specified voltage range. Doing so will cause

fire or an electrical shock.

3. Electric shock can occur if the panel is opened. Do not drop or insert any objects into the

ventilation openings of the LCD.

4. Only qualified engineers from certified system integrators or VARs are allowed to make

necessary functional modifications to the LCD, e.g., adding a touch screen.

5. For installations related to human safety, connect a separately installed mechanical switch

instead of the LCD’s power switch.

6. Designs with stand-alone and fault-tolerant hardware considerations should be implemented

using the series models as a critical alarm or production line control.

7. If considerable amount of dust, water, or fluids entered the LCD, turn off the power supply

immediately, unplug the power cord, and contact your vendor.

8. Explosions may occur with installations in environments where flammable gases are

present.

MPD 1xAG Series CyberResearch

Displays