® Displays MPD 1xAG Series NEMA 4 Sealed Panel-Mount LCD Monitor; RoHS-Compliant MPD 12AG: 12" Display MPD 15AG: 15" Display MPD 17AG: 17" Display USER’S MANUAL VER. 1.2 • MAR 2006 No part of this manual may be reproduced without permission CyberResearch , Inc. ® www.cyberresearch.com 25 Business Park Dr.
® CyberResearch Displays MPD 1xAG Series ©Copyright 2006 All Rights Reserved. March 1, 2006 The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of CyberResearch, Inc. In no event will CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Intentionally Blank iv ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Trademarks IBM PC is a registered trademark of International Business Machines Corporation. INTEL is a registered trademark of INTEL Corporation. AMI is registered trademarks of American Megatrends Inc. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners.
® CyberResearch Displays MPD 1xAG Series Power Cable for Terminal Block Touch Screen RS-232 Cable / Touch Pen / Driver CDROM 1 Optional 1 Optional If any of these items are missing or damaged, contact CyberResearch, Inc. Configuration Options Chassis coating/paint/color options Touch screen options RS-232 extension cable OSD extension wire cable Wall-mount bracket Replacement rubber gasket Safety Precautions 1.
® CyberResearch Displays MPD 1xAG Series 9. Special applications such as aviation/aerospace control, critical 10. Fault-tolerant and failsafe designs should be implemented with the use of the series models on transportation vehicles, ships, safety/security devices, or medical devices not related to life-support functionalities. Users/integrators should take the responsibility for implementations with adequate levels of reliability and safety. 11.
® CyberResearch Displays MPD 1xAG Series Additional Information and Assistance Maintain and Cleaning You need to note the following precautions before you begin to clean the LCD. When you clean any single part or component of the computer, please read and understand the details below fully. 1. Never spray or squirt liquids directly onto any computer component. If you need to clean the device, please rub it with a piece of dry and soft cloth or a slightly moistened cloth with the exterior casing. 2.
® CyberResearch Displays MPD 1xAG Series Cleaning Tools Although many companies have created products to help improve the process of cleaning your computer and peripherals, users can also use household items to clean their computers and peripherals. Below is a list of items you may need or want to use while cleaning your computer or computer peripherals.
® CyberResearch Displays MPD 1xAG Series Conventions Used in This Manual Naming From this point on and throughout the rest of this manual, the MPD 12/15/17AG series is referred to as simply the “LCD.” WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text in italics.
® CyberResearch Displays MPD 1xAG Series Table of Contents REVISION HISTORY ...................................................................................................... 2 ABOUT THIS MANUAL.................................................................................................. 2 COPYRIGHT NOTICE .................................................................................................... 2 TRADEMARKS................................................................................
MPD 1xAG Series ® CyberResearch Displays 2.4 Arm Mounting ............................................................................................................... 32 2.5 Wall Mounting .............................................................................................................. 33 2.6 Rack Mounting............................................................................................................. 35 2.7 Cabling .......................................................
® CyberResearch Displays MPD 1xAG Series Contact Information CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 06405 Tel: (203) 483-8815 Fax: (203) 483-9024 E-mail: sales@cyberresearch.com CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 11 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
Chapter 1 General Information
® CyberResearch Displays 1.1 MPD 1xAG Series Introduction The MPD 12/15/17AG series is the latest line of RoHS-compliant LCD monitors from CyberResearch, Inc. The MPD 12/15/17AG series is equipped with a 12.1/15/17 inch TFT type color LCD. With exceptional brightness and wide-view-angles, and fast response performance, the series is ideal for a wide range of applications. The MPD 12/15/17AG supports resolutions up to 1280(H) X 1024(V) pixels with 260,000 colors.
® CyberResearch Displays MPD 1xAG Series Automation & Control - Plant environment monitoring - Factory automation HMI terminal - Shop-floor/MES control Self-service Kiosk - Full-service receptionist kiosk - Hospital self-registrating terminal - Interactive photo kiosk - Video rental kiosk - Self-service POS terminal MPD 12/15/17AG Series Comparison Chart Model MPD 12AG MPD 15AG MPD 17AG LCD Size 12.1” 15” 17” Input Interface VGA + DVI-D VGA + DVI-D VGA + DVI-D Max.
® CyberResearch Displays MPD 1xAG Series (WxHxD) mm Operating 0 to 50 Temperature (°C) IP Level Table 1-1: 1.2 IP 65 0 to 50 0 to 50 IP 65 IP 65 Series Models Comparison Chart Series Model Variations MPD 12AG 12.1” LCD MPD 12AG: 12.1" LCD Monitor, Aluminum Front, Silver Color MPD 12AG-TR: 12.1" LCD Monitor, Aluminum Front, Silver Color, w/ 12.
® CyberResearch Displays MPD 1xAG Series Continuous Output Power 45W max. Hi-pot Isolation: Input / Output 4242VDC Table 1-9: 11111111 1.3 Power Adapter Specifications Product Dimensions Series Dimensions: 12.1” LCD CPanel Cutout: 312(W) x 229(H) x 50(D) mm 15” LCD Front panel: 340(W) x 260(H) x 58(D) mm CPanel Cutout: 388(W) x 287(H) x 55.1(D) (mm) Front panel: 410.0(W) x 309(H) x 65.1 (D) (mm) 17” LCD CPanel Cutout: 427(W) x 333(H) x 55.2(D) mm Front panel: 452(W) x 356(H) x 65.
® CyberResearch Displays MPD 1xAG Series Shock 10G (1/2 sine, 11msec) Color Beige (Pantone 413C or any specified paint color) Dimensions 17” LCD: 452(W) x 356(H) x 65 (D) mm; see the dimensions in the following discussion Protection IP-65 Environmental Friendliness RoHS compliant Ventilation Natural cooling air circulation Table 1-2: 1 General Hardware Specifications CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 17 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
® CyberResearch Displays MPD 1xAG Series 1.3.2 LCD Display Specifications 12.1” LCD (AUO): Size 12.1” Model G121SN01 Resolution (pixel) SVGA (800 x 600) Active Area (mm) 246.0 x 184.5 Pixel Pitch (mm) 0.307 Mode TN Number of Colors 262K Color Saturation (NTSC%) 55 View Angle (H/V) 150/110 Brightness (cd/m2) 250 Contrast Ratio 500:1 Response Time (ms at 25°C) 35 Power Consumption (W) 7.3 Interface 1ch LVDS Supply Voltage (V) 3.
® CyberResearch Displays MPD 1xAG Series 12.1” LCD (Toshiba): Size 12.1” Model LTD121C30S Resolution (pixel) SVGA (800 x 600) Pixel Pitch (mm) 0.297 Number of Colors 262K (18 bits) View Angle (H/V) R/L: 70/70; U/D: 55/70 Brightness (cd/m2) 250 Storage Temperature -20 to 80°C Lamp Life (hrs) 50,000 Table 1-4: 15” Display Specifications 1 CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 19 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
® CyberResearch Displays MPD 1xAG Series 15” LCD (AUO): Size 15” Model G150XG01 Resolution (pixel) XGA (1024 x 768) Active Area (mm) 304.1 x 228.1 Pixel Pitch (mm) 0.297 Mode TN Number of Colors 262K Color Saturation (NTSC%) 60 View Angle (H/V) 130/120 Brightness (cd/m2) 250 Contrast Ratio 400:1 Response Time (ms at 25°C) 12 Power Consumption (W) 11.5 Interface 1ch LVDS Supply Voltage (V) 3.
® CyberResearch Displays MPD 1xAG Series 17” LCD (AUO): Size 17” Model M170EG01 V8 Resolution (pixel) SXGA (1280 x 1024) Aspect Ratio 5:4 Active Area (mm) 337.9 x 270.3 Pixel Pitch (mm) 0.264 Mode TN Number of Colors 16.2M Color Saturation (NTSC%) 72 View Angle (H/V) 140/130 Brightness (cd/m2) 250 Contrast Ratio 500:1 Response Time (ms at 25°C) 8 Power Consumption (W) 25.
® CyberResearch Displays MPD 1xAG Series 1.3.3 Optional Touch Screen Specifications Model PanJit S121F2/S150F5/S171E1 series Type Analog resistive 5-wire or 8-wire Resolution 4096 x 4096 dpi based on controller resolution Position Accuracy Less than 1.
® CyberResearch Displays 1.3.4 Optional Rack-Mounting Kits Model Description MPD 12RK Fits MPD 12AG series MPD 15RK Fits MPD 15AG series MPD 17RK Fits MPD 17AG series Table 1 -8: 11 1.3.5 MPD 1xAG Series Optional Mounting Kits Power Adapter General Description: 45 Watt AC/DC Adapter Universal Input 90 to 264 VAC EMI Meets FCC/CISPR 22 Class B MTBF 165Khrs Limited Power Source Input Specifications: Input Voltage Range 90-264VAC Input Frequency 47-63 Hz Inrush Current 40A max.
® CyberResearch Displays MPD 1xAG Series Continuous Output Power 45W max. Hi-pot Isolation: Input / Output 4242VDC Table 1-9: 11111111 1.4 Power Adapter Specifications Product Dimensions Series Dimensions: 12.1” LCD Panel Cutout: 312(W) x 229(H) x 50(D) mm 15” LCD Front panel: 340(W) x 260(H) x 58(D) mm CPanel Cutout: 388(W) x 287(H) x 55.1(D) (mm) Front panel: 410.0(W) x 309(H) x 65.1 (D) (mm) 17” LCD CPanel Cutout: 427(W) x 333(H) x 55.2(D) mm Front panel: 452(W) x 356(H) x 65.
® CyberResearch Displays MPD 1xAG Series 15” LCD Dimension Drawing: Figure 1-2: 15” LCD Dimensions 1 17” LCD Dimension Drawing: Figure 1-3: 17” LCD Dimensions 1 CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 25 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
Chapter 2 Installation
® CyberResearch Displays MPD 1xAG Series WARNING! The MPD 1xAG series LCD must be installed and operated only by trained and qualified personal. Maintenance, upgrade, or repair on the open device may only be RMA’ed or carried out by qualified personnel who are familiar with the associated dangers. Since the device may weigh up to 10 kg (not including a swing arm or accessories of the like), it is advisable to have another person assist in the installation.
MPD 1xAG Series 2.2 ® CyberResearch Displays LCD Installation The Touch Panel functionality comes as an optional implementation to the MPD 1xAG LCD. The LCD panel connects to the host system’s VGA interface via the included VGA cable or a separately purchased DVI cable to a VTA card that features DVI connectivity. 2.2.1 LCD without a Touch Screen Connection Step 1. Connect the graphics card to the VGA or DVI-D signal input port on the rear panel. Step 2.
® CyberResearch Displays MPD 1xAG Series Figure 2-2: Rear Panel Interfaces 2 2.2.2 LCD with a Touch Screen Connection Step 1. Connect the CPU card to the RS-232 port on the rear panel Step 2. Install the drivers for managing the touch screen from the utility CD shipped with the system. Figure 2-3: Connection w/ Touch Screen 2 CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 29 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
® CyberResearch Displays MPD 1xAG Series 2.3 Panel Mounting Refer to the diagrams below for details on mounting the LCD. Care should be taken with the Step 1. Place the LCD into the panel. Step 2. Fasten the LCD into the panel using four supporters as diagrammed below. 15.3” Panel Cutout Dimensions Panel Cutout Dimensions MPD 12AG MPD 15AG 9.0” 12.3” 11.3” cutout dimensions. 16.
® CyberResearch Displays MPD 1xAG Series Figure 2-5: Panel Mounting Details 2 CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 31 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
® CyberResearch Displays MPD 1xAG Series 2.4 Arm Mounting The MPD 1xAG series is not only suitable for panel and wall mounting but also ideal for arm mounting with a 75/100mm VESA standard mounting positions. Figure 2-6: VESA Standard Holes 2 Figure 2-7: Exemplary Swing-arm Installation 2 32 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays 2.5 MPD 1xAG Series Wall Mounting The MPD 1xAG series can be mounted on wall with the help of wall-mounting holders. Holes should be drilled on the wall according to the diagrams below. Figure 2-8: Wall-mounting Holder Dimensions and Hole Positions 2 Mounting Steps: Step 1. Fasten the two wall-mount brackets to the wall each with four screws. Step 2. Fasten the four screw bolts to the wall-mount brackets as shown below. CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series WALL-MOUNT BRACKET STEP 1 STEP 2 SCREW BOLT Wall WALL-MOUNT VIBRATION KIT STEP 4 STEP 3 Wall Figure 2-9: 2 Attaching Wall-mount Brackets and the Vibration Kit Step 3. Hang the LCD onto the wall. Step 4. Fasten the wall-mount vibration stopper to the top. 34 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays 2.6 MPD 1xAG Series Rack Mounting The MPD 1xAG series can be integrated into industry standard 19” rack cabinets using optional rack-mount kits. The dimensions of the rack-mount kit for a 12.1” LCD is shown below. All series models using a specific rack-mounting kit which mounts into a standard 19” rack cabinet. Figure 2-10: 2 Rack-mounting Kit Dimensions CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 35 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
® CyberResearch Displays MPD 1xAG Series Steps 1 & 2. Fasten the rack-mount kit to the back of the LCD. Figure 2-11: Rack-mounting Steps 1 and 2 2 36 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays Steps 3 & 4. MPD 1xAG Series Fasten the LCD along with the rack-mount kit to the rack posts of a rack cabinet. Figure 2-12: 2 2.7 Rack-mounting Steps 3 and 4 Cabling Power Supply Terminals Connect the power cable according to the following procedures. Step 1. Check if the power cord is disconnected from the wall plug. Step 2. Loosen screws from the terminal, align and insert the wire terminals form your power cord and tighten the screws.
® CyberResearch Displays MPD 1xAG Series 2. 3. 38 be applied. Power cord should not be bundled with main circuit lines or the input/output signal lines. Surge protection and proper grounding. ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays CyberResearch, Inc. 25 Business Park Drive Branford, CT USA MPD 1xAG Series 39 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
Chapter 3 OSD Controls
® CyberResearch Displays 3.1 MPD 1xAG Series User Mode OSD Structure Figure 3-1: OSD Buttons 3 NOTE: Pressing the direction keys (LEFT or RIGHT) brings out a simple menu which adjusts the LCD screen brightness and contrast values. Level 0 Level 1 Value Main Display Features Menu Brightness 0 to 100 Contrast 0 to 100 Horizontal Size 0 to 100 Phase 0 to 100 H. Position 0 to 100 V.
® CyberResearch Displays MPD 1xAG Series Language Menu Select English French German Spanish Italian Japanese Russian Traditional Chinese Simplified Chinese OSD Menu Signal Menu OSD Time Out 0 to 60 sec OSD Position 1 to 5 OSD Transparency 0 to 100 Auto Setting On or Off Recall No or Yes Aspect Ratio 4:3 or 5:4 Digital Select Analog Backlight Menu Table 3-1: 3 42 Light Enable On or Off Light Contrast 0 to 100 Light Brightness 0 to 100 Light H Start 0 to 100 Light H Width 0 t
® CyberResearch Displays MPD 1xAG Series Using the OSD Main Display Features Brightness The brightness option adjusts the brightness of screen. This function adjusts the offset value of ADC. Please mind that setting this value too high or too low will affect the quality of image. Contrast This function adjusts the gain value of ADC. Please mind that adjusting this value too high or too low will worsen the quality of image.
MPD 1xAG Series ® CyberResearch Displays Color This menu allows you to fine-tune the palette of color hues for your LCD. 9300 NTSC standard Kelvin 7500 NTSC standard Kelvin User This item allows you to fine-tune the balance among Red, Green, and Blue color hues if images look garish or unrealistic. Language This menu provides options for selecting ODS screen legends in a preferred language. 44 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series OSD Configuration OSD Time Out Determines how many seconds the OSD screen stays on screen before it disappears when OSD is left unattended. OSD Position Adjusts the OSD position on the screen. The position 1 is on the upper left of the screen, position 2 on the upper right, position 3 the center, and vice versa. OSD Transparency Determines the opaqueness of OSD background.
® CyberResearch Displays MPD 1xAG Series Signal This menu allows you to manually select the type of graphic source input, i.e., analog (15-pin VGA) or digital (DVI-D). Backlight Light Enabled Turns backlight on or off. Light Contrast Adjust the backlight contrast. Light Brightness Adjust the backlight brightness. Light H Start Adjusts the backlight projection area in the horizontal direction. Light H Width Adjusts the width of the backlight projection area. 46 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Light V Start Adjusts the backlight projection area in the vertical direction. Light V Height Adjusts the size of backlight projection area in the vertical direction. CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 47 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
Chapter 4 Software Drivers
® CyberResearch Displays MPD 1xAG Series Touch Panel Driver This touch panel controller provides optimum performance of analog resistive touch panels for four-wire, five-wire & eight-wire models. It communicates with PC system directly through the COM4 serial port interface. The design is superior in sensitivity, accuracy, and user-friendly operation.
® CyberResearch Displays MPD 1xAG Series Your MPD 1xAG series touch panel option is connected via serial port interface. You do not have to select the PS/2 option here. Click Next to continue. Select the Auto 4Pts Calibration Utility check box and click Next to continue. Click OK to proceed. 50 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Provide an alternate destination folder or click Next to accept the default location. CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 51 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
MPD 1xAG Series ® CyberResearch Displays Provide a different name to be displayed in the program folder, or click Next to accept the default. The installation should now extract and copy files to the selected folder. 52 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series The installation program will then scan the available COM port connection. You will then be prompted to restart your system. You may choose to reboot later by selecting the No check box. Click Finish to continue. CyberResearch, Inc. 25 Business Park Drive Branford, CT USA 53 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
MPD 1xAG Series ® CyberResearch Displays The Touchkit utility should start immediately allowing you to finish the initial setup. 54 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays CyberResearch, Inc. 25 Business Park Drive Branford, CT USA MPD 1xAG Series 55 P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
Appendix A Accessories
® CyberResearch Displays 6.1 MPD 1xAG Series Accessory List Item 1 Description Qty. 1 2 POWER SUPPLY..POTRANS POWER POWER SUPPLY..
Appendix B Maintenance
® CyberResearch Displays MPD 1xAG Series Gasket Replacement A gasket used for a long time may gradually lose its ability to protect the LCD from fluids and vapors. Scratches or dirt may accumulate and it is recommended to change the gasket at least once a year. Replacement Procedure: Step 1. Place the LCD on a flat, level surface with the display screen facing downwards. If the LCD is mounted on a vertical wall or panel, remove it from the installation site. Step 2.
MPD 1xAG Series 60 ® CyberResearch Displays ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Product Service Diagnosis and Debug CyberResearch, Inc. maintains technical support lines staffed by experienced Applications Engineers and Technicians. There is no charge to call and we will return your call promptly if it is received while our lines are busy. Most problems encountered with data acquisition products can be solved over the phone. Signal connections and programming are the two most common sources of difficulty.
® CyberResearch Displays MPD 1xAG Series Intentionally Blank 62 ©Copyright 2006 CyberResearch, Inc.
® CyberResearch Displays MPD 1xAG Series Warranty Notice CyberResearch, Inc. warrants that this equipment as furnished will be free from defects in material and workmanship for a period of one year from the confirmed date of purchase by the original buyer and that upon written notice of any such defect, CyberResearch, Inc. will, at its option, repair or replace the defective item under the terms of this warranty, subject to the provisions and specific exclusions listed herein.
® CyberResearch Displays MPD 1xAG Series Intentionally Blank 64 ©Copyright 2006 CyberResearch, Inc.
CyberResearch, Inc. 25 Business Park Drive Branford, CT 06405 USA P: (203) 483-8815; F: (203) 483-9024 www.cyberresearch.
