User`s manual

MMGA Series CyberResearch

Motherboards

Step 3: Save and Exit BIOS. After the SATA support option is enabled, save and exit

the BIOS.

Step 4: Reboot the system. Reboot the system after saving and exiting the BIOS.

Step 5: Press Ctrl+I. During the system boot process, press Ctrl+I when prompted to

enter the RAID configuration software.

Step 6: Configure the RAID settings. Use the Intel

Matrix Storage Manager to

configure the RAID array. Brief descriptions of configuration options are given

below.

Step 7: Install the OS. After the RAID array has been configured, install the OS. To do

this, please refer to the documentation that came with the OS.Step 0:

G.4 RAID Configuration

G.4.1 Creating a RAID Volume

WARNING!

All data previously stored on the member drives of a RAID configuration are

destroyed during the RAID initialization process. If “used” drives are used to

create a RAID array, make sure the data has been moved or backed up

before creating a RAID array out of the disk drives.

Step 1: Select “Create RAID Volume”. Use the arrow keys to highlight Create RAID

Volume and press E

NTER. See Figure G-1.