User`s manual

CyberResearch
®
Motherboards MMGA Series
CyberResearch, Inc. 209
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
8.3 Using the Intel
®
AMT Web Interface
NOTE:
Prior to use the Intel® AMT web interface, please make sure the Intel®
AMT drivers are properly installed in the MMGA and the Intel® AMT
enabled confirmation dialog window displays after boot-up.
To access an Intel® AMT client system from a remote console, follow the steps below.
Step 1: Obtain the IP address of the client system.
Step 2: On the remote management console, open a web browser.
Step 3: If DHCP is enabled in the TCP/IP menu of the Intel® ME BIOS (Section 8.2,
Step 10), get the client system IP address in the MS DOS. Enter the client
system IP address and the port number in the web browser:
http://ip_address:16992 Example: http://192.168.1.7:16992 (Figure 8-11)
Or simply enter the defined host name: http://host_name:16992
Example: http://AMTsystem:16992
Figure 8-11: Intel® AMT Web Address
Step 4: If a static IP address is defined for the Intel® AMT client system, enter the
defined client system IP address and the port number in the web browser.
Step 5: A login window prompts (Figure 8-12).