User`s manual

MMGA Series CyberResearch

Motherboards

Step 10: Enable or disable DHCP. DHCP is enabled by default. If DHCP is disabled, enter

the following TCP/IP settings:

 Static TCP/IP address (the static TCP/IP address and Intel® AMI Host Name

must be different from those configured in the operating system)

 Subnet mask

 Default Gateway address (optional)

 Preferred Domain Naming Services (DNS) serer address (optional)

 Alternate DNS server address (optional)

 Domain name (optional)

Step 11: Make other necessary settings in the Intel® MEBx depending on users’ need.

Step 12: To exit the Intel® MEBx, return to the main menu and select Exit. (Figure 8-10)

Step 0:

Figure 8-10: Exit