User`s manual

MMGA Series CyberResearch

Motherboards

7.7 Realtek HD Audio Driver (ALC883) Installation

To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

NOTE:

This driver only needs to be installed if an external audio kit with a

RealTek ALC883 codec is installed.

7.7.1 BIOS Setup

Step 1: Enter the BIOS setup. To do this, reboot the system and press DEL during

POST.

Step 2: Go to the Southbridge Configuration menu. Enable the High Definition Audio

controller.

Step 3: Press F10

to save the changes and exit the BIOS setup. The system reboots.Step 0:

7.7.2 Driver Installation

To install the audio driver please follow the steps below.

Step 1: Select AUDIO from the list in Figure 6-2.

Step 2: A new window opens (Figure 6-42).