User`s manual

CyberResearch
®
Motherboards MMGA Series
CyberResearch, Inc. 103
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Figure 1-65: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
5.8.6 USB Device Connection
There are two external USB 2.0 connectors. Both connectors are perpendicular to the
MMGA. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the MMGA. See Figure 1-66.