User`s manual

CyberResearch
®
Motherboards MMGA Series
CyberResearch, Inc. 101
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Figure 1-63: Parallel Device Connector
Step 3: Secure the connector. Secure the DB-25 connector to the external interface by
tightening the two retention screws on either side of the connector. Step 0:
5.8.4 PS/2 Keyboard and Mouse Connection
The MMGA has a dual PS/2 connector on the external peripheral interface panel. The
dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow
the steps below to connect a keyboard and mouse to the MMGA.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See Figure 1-64. Step 0: