User`s manual

MMGA Series CyberResearch

Motherboards

5.8 External Peripheral Interface Connection

The following external peripheral devices can be connected to the external peripheral

interface connectors.

 Audio devices

 RJ-45 Ethernet cable connectors

 Parallel port device

 Keyboard/mouse

 Serial port devices

 USB devices

 VGA monitors

To install these devices, connect the corresponding cable connector from the actual

device to the corresponding MMGA external peripheral interface connector making sure

the pins are properly aligned.

5.8.1 Audio Connection

Audio signals are interfaced through three phone jack connections. The red phone jack is

for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to

connect audio devices to the MMGA.

Step 1: Locate the audio phone jacks. The locations of the audio phone jacks are

shown in Chapter 3.

Step 2: Insert audio phone jack plugs. Insert audio phone jack plugs into the audio

phone jacks on the external peripheral interface. See Figure 1-61. Step 0: