User`s manual

CyberResearch
®
Motherboards MMGA Series
CyberResearch, Inc. 93
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
5.6.2 Motherboard Installation
To install the MMGA motherboard into the chassis please refer to the reference material
that came with the chassis.
5.7 Internal Peripheral Device Connections
5.7.1 Peripheral Device Cables
The cables listed in Table 1-35 are shipped with the MMGA.
Quantity Type
1 Dual RS-232 cable
6 SATA drive cables
3 SATA drive power cables
1 USB cable
Table 1-35: Provided Cables
5.7.2 Dual RS-232 Cable Connection
The dual RS-232 cable consists of two connectors attached to two independent cables.
Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket.
To install the dual RS-232 cable, please follow the steps below.
Step 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 1-56. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.