User`s manual

MMGA Series CyberResearch

Motherboards

5.3 Unpacking

5.3.1 Unpacking Precautions

When the MMGA is unpacked, please do the following:

 Follow the anti-static precautions outlined in Section 5.1.

 Make sure the packing box is facing upwards so the MMGA does not fall out

of the box.

 Make sure all the components in the checklist shown in Chapter 3 are

present.

NOTE:

If some of the components listed in the checklist in Chapter 3 are

missing, please do not proceed with the installation. If any of the

components listed in the checklist below are missing, contact

CyberResearch, Inc.

5.4 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU,

MMGA and other electronic components attached to the system may

be incurred. Running a CPU without a cooling kit may also result in

injury to the user.

The CPU, CPU cooling kit and DIMM are the most critical components of the MMGA. If

one of these components is not installed the MMGA cannot run.